Swing Type Level Switch SWM Series

New category of level switches developped with our experience and technology accumulated over years.
Specially developped power unit realizes three times longer life than rotary level switches!

Catalog Download

Features

  • No driving unit such as gear and clutch is contained, which reduces cost for internal parts replacement!
  • Complete separation with partition wall between swing part and the power unit wall prevents the entry of fine particles due to internal pressure.
  • No damage to the power unit due to overload or impact on the paddle as the paddle is uncoupled and swings by the power unit.
  • Applicable to pressurized tank.

Operating Principles

The deposit of material restricts the paddle swinging like a pendulum according to the signal from the electronic circuit and it outputs contact.
ModelSWM-8B Standard Flange Type
Power Source AC100~240V 50/60Hz （Allowable range AC85~250V） Option DC24V （Allowable range DC20～36V）
Power Consumption 12VA (Max.33VA)
Contact Capacity AC250V 5A DC30V 5A (Resistance Load)
Stepping Angle 15° (twice/sec.)
Allowable Temperature below 50℃(Neither condensed nor frozen) Heat resistant type Max.250°C
Allowable Pressure 0.2MPa (option 0.5MPa)
Color Gold
Process Connection Equivalent to JIS 5K 65A
Enclosure Rating IP67

Product Lineup

In addition to the above, various specifications are available.
For more information, see respective catalogs or contact us by phone or mail.

  • SWM-8B

    Standard Flange Type

    SWM-8B

    Standard Flange Type

    • Standard model of swing level switch.
    • Various flanges are available.

  • SWM-8BH

    Heat Resistant Type

    SWM-8BH

    Heat Resistant Type

    • Applicable to 250℃ (temperature inside the tank).
    • Shaft adjustable model and protective tube extension model are available.
    • Various flangs are available.

  • SWM-15B

    Withstand Load Type

    SWM-15B

    Withstand Load Type

    • Suitable for low level detection inside the big tank.
    • Protective tube extension model and heat resistant model are available.
    • Various flanges are available.

  • SWM-8B (SUS304)

    Wetted Parts SUS Type

    SWM-8B (SUS304)

    Wetted Parts SUS Type

    • Various flanges are available.

  • SWM-8BSC

    Screw Joint Type
    (Wetted Parts SUS)

    SWM-8BSC

    Screw Joint Type
    (Wetted Parts SUS)

    • Protective tube extension model is available.
    • Wetted parts stainless steel.
    • Folding paddle is available as an option.

  • SWM-8BA

    Adjustable Shaft Type

    SWM-8BA

    Adjustable Shaft Type

    • Suitable for application which needs whole length adjustment because of the repose angle.
    • Top mounting for high level detection.
    • Length is adjustable with fixing nut.
    • Insertion length 500mm-4000mm.

  • SWM-8BS

    Extensive Protective Tube Type

    SWM-8BS

    Extensive Protective Tube Type

    • Various flanges are available.
    • Both top and side mounting are available
    • Wetted part material stainless steel is available.
    • Slide flange is available. Insertion length is adjustable.