Tilt Switch TC-1/TC-3
Tilt type level switch with only one moving part!
Level detection by simple and secured operation!
Features
- Simple structure which is withstandable against big impact loads of particulates.
- Applicable to upper, middle, and lower limits.
- No power source is needed. Low wiring cost.
Operating Principles
When the main unit suspended from the top of the tank tilts due to the repose angle of the material, the tilt of the main unit is detected and the contacts are switched.
The output contact returns to the initial state when there is no more material to be detected.
| Model | TC-3 | TC-1 |
| Output Contact | SPDT x 1 | SPDT x 1 |
| Contact Capacity | AC250V 10A | AC250V 10A |
| Temperature | -10～+80℃ （No condensation / no freezing） | -10～+120℃ （No condensation / no freezing） |
| Conduit Connection | 1/2 inch (with gland） | 1/2 inch (with gland） |
| Conformable Cable | 1/4~3/8 inch three-core cable | 1/4 inch two-core cable |
| Sensing-paddle fitting | NPT 1/2 | NPT 1 |
| Enclosure Rating | IP56 | IP56 |
| Weight | About 1.3Kg | About 11Kg |
Product Lineup
In addition to the above, various specifications are available.
For more information, see respective catalogs or contact us by phone or mail.
-
TC-3
Standard Type
-
TC-1
For Heavy Load