Conveyor Peripherals | Products | All-round Manufacturer of Level Controllers for Powder, Granules and Liquid ～KANSAI Automation Co., Ltd.

It stops belt conveyors. It is most suitable for emergency stop.
Switches that detect the tilt and meandering of the conveyor belt are also available.

• Easy operation with 2-direction function.
• Based on each application, either indication flag or lamp is selectable.

• Powder
• Granules
• Lump

It detects the flow of the conveyor and chute entrance.
Various specifications are available depending on detection conditions.

• Simple inside structure and easy maintainance.
• Custom made available for sensing board based on the application.

• Powder
• Granules
• Lump

It detects speed change of a conveyor.
It prevents peripheral parts and motors from being damaged or burnt.

• High accuracy detection is realized by digital control system.
• Operation speed is adjustable between the range of 3-1999rpm.

• Powder
• Granules
• Lump

It can be used for various substances including construction aggregates, gravel, and crushed stones as long as they contain water to some extent.

• Easy installation and handling. Difficult technical knowledge is not required.
• Easy sensitivity setting.

• Powder
• Granules
• Lump

It detects the tilt of the instrument body and produces contact output.
It can withstand the severe impact loads of particulate matter due to its simple composition.

• No power supply required and low cost for wiring.
• Hang the unit at the convenient installation point.

• Powder
• Granules
• Lump