Products

  1. Top
  2. Products
  3. Level Indicator

Level Indicator

Contact Level Indicator

[Capacitance Type Level Indicator] KLI/KLT/KLG Series

[Capacitance Type Level Indicator] KLI/KLT/KLG Series

Easy maintenance and long term stable measurement since there is no moving part. Select the most suitable model from wide variation of sensors to any application.

  • Stable measurement is available even while charging. No influence by powder dust.
  • Intrinsically safe model is available for hazardous area.
  • Powder
  • Granules
  • Liquid
  • Surface Interface
[Sounding Bob Type Level Indicator] KSL Series

[Sounding Bob Type Level Indicator] KSL Series

Housing is so rubust that it provides long term stable measurement even under severe ciscumstances. Applicable to various sites from small hopper to big silo.

  • Stable measurement with its mechanical structure, which is not influenced by measuring material or surrounding circumstances.
  • Applicable to huge silos. Measurement range 40m Max.
  • Powder
  • Granules
  • Lamp
  • UnderWater Solid
[Rador Type Level Indicator(Time Domain Reflectometry)] VF Series

[Rador Type Level Indicator(Time Domain Reflectometry)] VF Series

It irradiates microwaves via the probe to achieve stable detection without being affected by dust particles, vapors, and obstacles in the tank.

  • Detection for powder, granule, liquid, slurry etc.
  • Stable measurement with no influence by each material's moisture content or electrical properties.
  • Powder
  • Granules
  • Liquid
[Float Type Level Indicator] KF-100 Series

[Float Type Level Indicator] KF-100 Series

The moving part is only the float. Easy maintainance and long term stable measurement. No influence by objective change or environmental change such as vapor, gas etc.

  • Applicable to wide range of liquid since the material is SUS or corrosion resistant resin.
  • No influence by gas etc. since the reed switch is applied.
  • Liquid
  • Surface Interface

TOPへ戻る

Non-Contact Level Indicator

[Rador Type Level Indicator] VG6/VG7 Series

[Rador Type Level Indicator] VG6/VG7 Series

Forefront of non contact level measurement. Measurement range 80m Max. No influence by exchanging measuring materials.

  • No influence by replacing measuring materials.
  • Appliacable to vacuum, high temperature and high pressure environment.
  • Powder
  • Granules
  • Liquid
[Ultrasonic Type Level Indicator] MULTIFLEX/MINIFLEX LR

[Ultrasonic Type Level Indicator] REFLEX/MULTIFLEX/MINIFLEX LR

Standard model for non contact level measurement. Long measurement range (Powder; 30m Max., Liquid; 50m Max.). Scanning available.

  • To start measurement, just set the required parameter on key pad.
  • Powder
  • Granules
  • Liquid
[Ultrasonic Type Level Indicator(for Liquid)] LU Series

[Ultrasonic Type Level Indicator(for Liquid)] LU Series

2 wires ultrasonic level meter for liquid. Compact and integral model and easy initial setting.

  • Applicable to corrosive liquid since the material of the transmission surface is PVDF.
  • Fail safe function for echo lost.
  • Liquid
[Laser Type Level Indicator] LASER RANGE-L/-S Series

[Laser Type Level Indicator] LASER RANGE-L/-S Series

This noncontact type level meter is intended for long-span and pinpoint measurement. It is most suitable for places difficult to measure and dangerous places such as high elevations.

  • Trustful pin-point measurement even where these are many obstacles.
  • Measurable from outside the tank through the checking window or hole.
  • Powder
  • Granules
  • Liquid

TOPへ戻る

© KANSAI Automation Co., LTD. All Rights Reserved.