Products

  1. Top
  2. Products
  3. Conveyor Peripherals
  4. TC-1/TC-3

Product Detail

Tilt Switch TC-1/TC-3

Features

The tilt type level switch has only one moving part!
Levels are detected by simple and sure operations!

  • It has a simple structure and can withstand severe impact loads of particulates.
  • It can be used for upper, middle, and lower limits.
  • No power source is needed and wiring cost is low.
  • Powder
  • Granules
  • Lump

Operating Principles

When the main body hung from the top of the tank is tilted by the repose angle of the measured substance, the tilt of the main body is detected and the contact is switched. When the measured substance passes over, the output contact is restored to the initial state.

Standard Specification
Model TC-3 TC-1
Weight About 1.3Kg (Aluminum casting) About 11Kg (Cast-iron)
Output Contact SPDTx1 SPDTx1
Contact Capacity AC250V 10A AC250V 10A
Temperature -10~+80℃
(No condensation / no freezing)
-10~+120℃
(No condensation / no freezing)
Conduit Connection 3/8B(with gland) 1/2B(with gland)
Conformable Cable 3/8 inch three-core cable 1/4 inch two-core cable
Sensing-paddle fitting NPT 1/2 NPT 1
Enclosure Rating IP56 IP56
Product LineupWhen it's clicked, you can see details.

In addition to the above, various specifications are available.
For more information, see respective catalogs or contact us by phone or mail.

  • TC-3Standard Type

  • TC-1Heavy Loading type

TC-3
Standard Type

For high sensitivity, we provide actuator as an option.
We prepare the actuator at any length.
Flange, terminal box etc. as options.

TC-1
Heavy Loading type

For high sensitivity, we provide actuator as an option.
We prepare the actuator at any length.
Flange, terminal box etc. as options.

  • チルトスイッチ_製品カタログ

© KANSAI Automation Co., LTD. All Rights Reserved.